Thordoncn弹塑合金材料，在清水或含泥砂量较多的水中，均表现低摩擦、低磨损的优点，比一般金属和非金属主轴密封材料更耐用。我们根据您的机组定制特定尺寸，节省材料成本，供货周期更短。

Thordoncn elastoplastic alloy material exhibits the advantages of low friction and wear in clean water or water with a high content of mud and sand, and is more durable than general metal and non-metal spindle sealing materials. We customize specific sizes based on your unit to save material costs and shorten the supply cycle.

▪ 内含润滑材料，减轻对抗磨板的磨损，减少漏水；

▪ 天然干润滑和水润滑不污染水源，即使短时间缺水运行不容易烧坏，极大地提高了运行的可靠性；

▪ 水润滑条件下，测得其PV值原远高于大多数的滑动轴承材料（19.75MPa×5.15m/s =101.3MPa·m/s）。

▪  Contains lubricating materials to reduce wear on the wear-resistant plate and minimize water leakage;

▪  Natural dry lubrication and water lubrication do not pollute the water source, making it less likely to burn out even in short periods of water shortage, greatly improving the reliability of operation;

▪  Under water lubrication conditions, its PV value was measured to be much higher than most sliding bearing materials (19.75MPa × 5.15m/s=101.3MPa · m/s).

Thordoncn-XL弹塑合金材料具有回弹性好、耐油涨、耐老化的优点，是替代橡胶和聚氨酯的理想之选。我们能提供各种不同的硬度的材质以满足不同机组的安装运行要求，为您解除后顾之忧

▪ 回弹性好，永久压缩形变仅13%，止水性能持久稳定；

▪ 内含润滑粒子，特别适合工作于高含砂量的水中；

▪ 油涨不明显，不易老化，便于备件存放。

Thordoncn XL elastoplastic alloy material has the advantages of good resilience, oil resistance, and aging resistance, making it an ideal choice to replace rubber and polyurethane. We can provide various hardness materials to meet the installation and operation requirements of different units, relieving your worries

▪  Good resilience, with a permanent compression deformation of only 13%, and long-lasting and stable waterproof performance;

▪  Contains lubricating particles, especially suitable for working in water with high sand content;

▪  The oil does not rise significantly, is not easily aged, and is convenient for storing spare parts.

关键词：赛龙轴承，水润滑轴承，高分子材料轴承，高性能聚合物滑动轴承

相对体积磨耗比较 (mm³)